An automatic door is more than a door that opens by itself. Behind the glass sits a motorised operator, a control unit, activation devices such as motion sensors or push buttons, safety sensors that watch the doorway, and a locking system. Each part has to suit the opening and the people using it.
We guide you through those choices, from sliding versus swing operation to sensor types and locking modes, and then install the complete system. Every door is commissioned, tested and adjusted before handover.
In short: Hustle Installations supplies and installs automatic doors and operators for commercial and residential properties. Cost depends on door type, opening size, glass, operator and controls. We aim to respond to enquiries within one business day and provide a free site assessment and quote.
Every automatic door system has three working parts. The operator is the motor and drive mechanism, usually housed in a header above the door, which moves the door leaves along a track or swings them on a pivot arm. Activation devices tell the door when to open, whether that is a motion sensor, a push button, a card reader or a remote. Safety sensors monitor the threshold and approach area so the door stops or reverses if someone is in the way.
Installation means fitting all three to a properly prepared opening with a suitable power supply, then programming opening speed, hold-open time and closing force. Getting these settings right is what makes a door feel safe and natural to use. For an overview of the services we offer, see our auto door installation page, or browse our automatic doors range.
Many automatic door problems start with a system that did not suit the opening or its users.
Picking sliding when swing suits better, or vice versa. Sliding doors need wall space beside the opening for the leaves to travel, while swing doors need clear floor space for the door to open into.
Under-sizing the operator. Heavy glass leaves or high traffic need an operator rated for the load, or it will wear out early.
Ignoring the users. Slow walkers, wheelchair users and children need longer hold-open times and well-placed safety sensors.
Forgetting power and locking. Without planning for power supply, battery backup or after-hours locking, the door may not suit the building.
We install a range of automatic door types and operators to suit different openings and users.
The cost of an automatic door depends on which system you choose and how much work the opening needs.
See indicative price ranges on our automatic door installation Melbourne page. Want an exact figure? Book a free site assessment.
A good automatic door installation is mostly about preparation and fine-tuning. We confirm the opening is structurally sound, square and has a suitable power supply before the operator goes in, and we spend time after installation adjusting speeds, forces and sensor fields so the door behaves exactly as it should.
Our step-by-step process:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
Sliding automatic doors suit most shopfronts, lobbies and high-traffic entries. They open without swinging into anyone’s path and can be made wide enough for trolleys, beds or groups of people, but they need clear wall space beside the opening. Swing door operators suit existing hinged doors, internal doors and narrower openings, and low-energy versions are a common choice for accessible doors in clinics, offices and bathrooms.
Other factors to weigh up include how many people use the door each day, whether it must lock after hours, whether it needs to keep working during a power outage and whether it forms part of an accessible path of travel, where AS 1428.1 may apply where required. We walk you through these questions during the site assessment so the system you choose suits the building for years.
An automatic door that opens too slowly, closes too quickly, triggers every time someone walks past or stops responding after a few months is frustrating for everyone. Most of these issues come down to a poor match between door and opening, or to rushed commissioning where settings were left at factory defaults.
People also find it hard to compare quotes when one installer recommends a sliding door, another suggests a swing operator and neither explains why. We explain the reasoning behind our recommendation, show you what is included and take the time to set up and test the door properly before we leave.
What sets us apart:
We explain door types, operators and sensors so you can choose with confidence.
Each system is sized for the opening, door weight and expected traffic.
Speeds, forces and sensor fields are adjusted rather than left at defaults.
Every safety sensor and reversing function is checked before handover.
Where suitable, we automate existing doors to save time and cost.
Servicing and adjustments are available to keep your door running smoothly.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Automatic door installation involves assessing the opening, choosing a door type and operator, fitting the track or arm, door leaves, sensors and controls, connecting power and then commissioning the system. Commissioning means programming speeds, hold-open times and forces and testing every safety function so the door is safe and comfortable to use.
Automatic doors use activation devices such as microwave motion sensors, infrared presence sensors, push buttons, card readers or remote controls. When the device detects a person or receives a signal, it tells the operator to open the door. Separate safety sensors watch the doorway and stop or reverse the door if someone is in the way.
Sliding doors move sideways along a track and need wall space beside the opening, making them ideal for busy entries. Swing doors use an operator arm to open a hinged door and need clear floor space in front. Swing operators are often used to automate existing doors, while sliding systems are common for new shopfronts and lobbies.
Often, yes. Many hinged doors can be fitted with a swing door operator if the door, frame and hinges are in good condition and the door is within the operator’s weight and size limits. Some sliding doors can also be automated. We inspect the door before recommending a retrofit or a new automatic door installation.
A low-energy operator opens and closes a swing door slowly and with limited force, which reduces the risk of injury and often allows simpler safety sensing. Low-energy doors are commonly used for accessible entries, bathrooms and internal doors in clinics and offices where traffic is lighter and users may need more time.
It depends on the system. Many sliding doors can be pushed open manually when power is off, and battery backup units can keep the door operating or open it automatically during an outage. We discuss emergency and power failure options during the assessment so the door suits how your building needs to work.
Retrofitting an operator to an existing door is often completed in a day. A new automatic sliding door with glass and framing typically takes one to two days on site after manufacturing lead time. We confirm the expected timeframe in your quote and schedule installation at a time that suits you.
Yes. We remove packaging, offcuts and any old door hardware, clean the glass and frames, and leave the entry tidy and ready to use. Where drilling or cutting creates dust, we contain it and clean as we go. Clean-up is included in the automatic door installation price.
Yes. Automatic doors have moving parts and safety sensors that need periodic checking and adjustment. How often depends on traffic and the manufacturer’s recommendations. Regular servicing helps prevent breakdowns, keeps safety functions working and extends the life of the operator and track.
Call us on 0499 090 079 or send your details through our contact form. Let us know the type of property, the size of the opening, whether you have an existing door and how busy the entry is. We aim to respond within one business day and will arrange a free site assessment.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
