Choosing an automatic door is easier with someone who can explain the options. For a Melbourne shopfront, a bi-parting slider might be the answer. For a clinic corridor, a low-energy swing operator could suit better. For a home, a quiet operator with a push button or remote may be all that is needed.
We assess your entry, explain how each system would work there and recommend the one that fits. Then we install the door, operator, sensors and controls and commission everything on site.
In short: Hustle Installations supplies and installs automatic doors across Melbourne for businesses, strata and homes. Cost depends on system type, opening size, glass, operator and controls. We aim to respond to enquiries within one business day and provide a free site assessment and quote.
Melbourne properties vary enormously, and so do their entries. Inner-city terraces converted to shops have narrow frontages with little wall space for sliding leaves. Suburban medical centres and aged care facilities need gentle operation and long hold-open times. Apartment lobbies need secure access control, and homes adapted for ageing in place need simple, reliable controls. A system that suits one of these may be completely wrong for another.
We look at the opening, available space either side, traffic, users, power and security before recommending sliding or swing operation, operator type and sensor setup. You get a clear explanation of why the system suits your site and what is included in the price. For a detailed explanation of door types and operators, read our automatic door installation guide, or visit our main auto door installation page.
Some Melbourne conditions have a direct effect on which automatic door system makes sense.
Narrow inner-city frontages. Many shopfronts in suburbs like St Kilda and Richmond have little side wall space, which can rule out wide sliding systems and favour swing operators or telescopic layouts.
Bayside salt air. Near the bay, tracks, rollers and exposed hardware benefit from corrosion-resistant finishes and more regular servicing.
Elevated, windy sites. Entries on higher ground, such as around Doncaster, can face strong gusts that affect door operation and sensors.
Storm-related power outages. Battery backup or manual breakout options help doors stay usable when power drops.
We install a range of automatic door systems across Melbourne, each matched to its site.
As a general guide, a new automatic sliding door with operator and glass panels costs around $6,000–$15,000+ supplied and installed in Melbourne. Retrofitting an operator to a suitable existing door is typically around $3,500–$7,000, and a swing door operator around $2,500–$5,000.
Want to compare options? We will assess your site and quote each suitable system for free.
Because the right system depends so much on the site, our process puts the assessment first. We measure the opening and surrounding space, talk through who uses the entry and when, and explain the options before you commit. Installation is booked to suit your business, building or household, and every door is programmed on site rather than left on default settings.
Step by step:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
From our base on Bayfield Road East in Bayswater North VIC 3153, in the City of Maroondah, we install automatic doors throughout metropolitan Melbourne. That includes shopfronts in St Kilda and Richmond, medical and commercial sites in Caulfield and Oakleigh, homes and businesses in Kew and Balwyn, and elevated sites around Doncaster. Travel is around 25 minutes to Doncaster and Glen Waverley, about 45 minutes to the inner south-east and roughly an hour to the bayside, depending on traffic.
Wherever the site, we talk through each suitable system in person so you can compare them during the assessment. Explore our local pages for Doncaster, Kew, Caulfield and St Kilda.
A common story we hear in Melbourne is of an automatic door that was simply the wrong type for the entry: a slider squeezed into a narrow shopfront so it only opens partway, or a heavy swing operator in a clinic corridor that closes too quickly for patients. Others had a suitable door but settings that were never adjusted, so it opens for every passer-by on a busy footpath.
Comparing quotes is also confusing when each installer suggests a different system without explaining why. We set out the options side by side, explain the trade-offs and then commission the chosen door properly for its users.
What sets us apart:
We compare suitable systems so you understand the trade-offs before choosing.
We account for narrow frontages, coastal air, wind exposure and power outages.
We install automatic doors for businesses, strata buildings and homes.
Speeds, hold-open times and sensor fields are set for your users.
Every safety function is tested before the door is handed over.
Servicing and adjustments are available after installation.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Yes. We offer automatic door installation across metropolitan Melbourne for shops, clinics, offices, apartment buildings and homes. We assess the entry, explain which systems suit it, then supply, install, program and test the chosen door. Every project starts with a free site assessment and a written quote.
As a general guide, a new automatic sliding door with operator and glass costs around $6,000–$15,000+ supplied and installed. Retrofitting an operator to a suitable existing door is around $3,500–$7,000, and a swing door operator around $2,500–$5,000. The final price depends on the system and site and is confirmed after a free assessment.
Narrow frontages, common in inner suburbs such as St Kilda, Prahran and Richmond, often lack the side wall space a standard slider needs. A swing door operator or a space-saving sliding configuration may suit better. We measure the frontage and available wall space before recommending a system.
Salt air in bayside suburbs such as St Kilda, Elwood and Brighton can accelerate corrosion on exposed tracks, rollers and fixings. Corrosion-resistant finishes and more regular servicing help. We take the location into account when specifying the system and recommending a servicing schedule.
Without backup, many sliding doors can be pushed open manually when the power fails. Battery backup units can keep the door working for a period or open it automatically when power drops. We discuss power failure behaviour during the assessment so the door suits your building’s needs.
Yes. Many Melbourne homeowners add automatic operators to entry or internal doors for accessibility, ageing in place or convenience. Residential operators can be activated by push buttons, remotes or sensors. We assess the door and frame first to confirm a suitable operator.
Retrofitting an operator to an existing door is often done in a day. A new automatic sliding door system typically takes one to two days on site after a manufacturing lead time. We confirm the timeframe in your quote and book installation at a time that suits you.
Yes. We remove packaging, offcuts and any old hardware, clean the glass and frames and leave the entry tidy and ready to use. Dust from drilling is contained and cleaned as we go, and clean-up is included in every automatic door installation quote.
We cover metropolitan Melbourne, including St Kilda, Elwood, Richmond, Prahran, South Yarra, Kew, Hawthorn, Balwyn, Doncaster, Caulfield, Oakleigh, Bentleigh and Glen Waverley. Our Bayswater North base gives quick access to the eastern suburbs, and we travel regularly across the city.
Call us on 0499 090 079 or send your details through our contact form. Let us know the property type, the opening size, any existing door and who uses the entry, and add photos if you can. We aim to respond within one business day and will arrange a free site assessment.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
