Melbourne has an unusually varied housing stock, from Victorian terraces and Edwardian villas to post-war brick veneer homes, Californian bungalows, apartments and brand-new rebuilds. Each comes with its own window challenges, and our window installations across Melbourne are planned around the home in front of us.
We install aluminium windows, sliding and stacking doors and double-glazed units, replacing draughty timber or ageing aluminium frames and fitting windows into new extensions and homes. Every opening is measured, packed, flashed and sealed for a weather-tight finish.
The result is better comfort through Melbourne winters, less heat in summer and fewer sticking, rattling windows.
In short: Hustle Installations installs windows and doors across Melbourne for homeowners, renovators and builders. Pricing depends on window size, glass type, removal of old frames and access. We aim to respond to enquiries within one business day, and we offer a free measure and quote for every Melbourne property.
Many Melbourne homes still have their original windows. In older inner and eastern suburbs, that can mean timber sashes that rattle and let in cold air, while middle-ring homes from the 1960s to the 1980s often have single-glazed aluminium frames with worn seals. Both make it harder to keep homes comfortable when the weather swings between a hot northerly and a cold southerly change.
Our team installs replacement and new windows that suit the style of the home and improve everyday comfort. We recommend the right frame and glass for each room, plan the work so your home is not left open to the weather, and finish every opening neatly. To learn more about our methods and range, visit our main window installations page. Whether you are upgrading a few windows or the whole house, you get one team and one clear quote.
A handful of local conditions shape which windows work best in Melbourne homes:
Rapid temperature swings. Melbourne can move from heat to cold in hours. Single glazing and gaps around frames let that change straight into the house, so double glazing and good sealing make a real difference.
Heritage overlays. Many inner-suburb streets are covered by heritage overlays, which can affect changes to windows visible from the street. Traditional proportions or slimline frames may be needed where required.
Traffic, tram and rail noise. Homes on main roads and near train lines benefit from laminated or acoustic double-glazed units.
Salt air near the bay. Bayside homes need finishes and hardware that stand up to coastal conditions.
We put together each installation to suit your home, rooms and budget.
As a general guide, a standard aluminium window supplied and installed in Melbourne costs around $600 to $1,500. Double-glazed or larger windows typically range from about $1,200 to $3,000 or more, and installation only for windows you have already bought starts from around $250 per opening. Costs vary with:
Want an exact figure? Book a free measure and quote for your Melbourne home.
We plan each Melbourne installation around the weather, your household and the condition of the existing openings. That means checking forecasts, working room by room where needed and never leaving an opening exposed longer than necessary.
Our installations follow four steps:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
Our base is on Bayfield Road East in Bayswater North (VIC 3153), in the City of Maroondah in Melbourne’s outer east. We install windows across metropolitan Melbourne, from leafy eastern suburbs such as Kew, Balwyn and Camberwell to Glen Waverley, Mount Waverley and Oakleigh in the south-east, inner suburbs like Richmond and South Yarra, and bayside areas including Brighton, Hampton and St Kilda. Travel takes around 25 minutes to Doncaster and Glen Waverley, about 45 minutes to the inner south-east and around an hour to bayside, depending on traffic.
Find out more about our local work on our window installation pages for Kew, Brighton, Glen Waverley and St Kilda.
Melbourne homeowners usually call us because of discomfort: cold bedrooms in July, living rooms that bake in the afternoon sun, condensation running down the glass or the constant rumble of traffic. Others have had windows replaced before and still find leaks around the frames after heavy rain, a sign the installation was rushed or the flashing was missed.
We focus on the details that matter in Melbourne’s climate: choosing glass for orientation and noise, sealing frames against wind-driven rain and making sure windows open and lock easily. We also respect heritage character where it applies, so upgrades sit comfortably with the home.
What sets us apart:
Every opening is measured on site so new windows fit properly.
Glass and sealing are chosen to handle heat, cold, wind and rain.
You know exactly what is included before any work begins.
Windows are packed, flashed and sealed to keep water and draughts out.
Floors and furniture are protected, and every room is left clean.
We aim to respond to enquiries within one business day.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Our window installations in Melbourne include measuring each opening, recommending frames and glass, supplying the windows if needed, removing old frames, fitting, flashing and sealing the new windows, and cleaning up afterwards. We work on period homes, family houses, apartments, extensions and new builds across the metro area.
As a general guide, a standard aluminium window supplied and installed costs around $600 to $1,500. Double-glazed or larger windows range from about $1,200 to $3,000 or more, and installation only starts from around $250 per opening. Your exact price is confirmed after a free measure and quote.
We install windows across metropolitan Melbourne from our Bayswater North base, including Kew, Balwyn, Camberwell, Glen Waverley, Mount Waverley, Oakleigh, Richmond, South Yarra, Brighton, Hampton and St Kilda. If your suburb is not listed, contact us and we will let you know if we can help.
For most Melbourne homes, yes. Double glazing helps keep heat in during winter, reduces heat gain in summer, cuts condensation and lowers outside noise. It is especially helpful in bedrooms, living areas and rooms facing busy roads or strong afternoon sun. We can quote both single and double-glazed options.
Yes, we work on many period homes. Heritage overlays in parts of Melbourne can affect changes to windows visible from the street, so check with your council about permit requirements before work begins. We can install frames that respect traditional proportions and work from approved plans.
Yes. Laminated acoustic glass and double-glazed units, combined with well-sealed frames, can noticeably reduce noise from traffic, trams and trains. The improvement depends on the glass chosen and how well the window is sealed into the wall. We can recommend options based on your location and the rooms affected.
Once your windows are ready, a single window can often be replaced in a few hours, while a whole home usually takes one to several days. Made-to-order windows have a manufacturing lead time, which we confirm with your quote. We plan around Melbourne weather to keep your home protected.
Yes. We protect floors and furniture, remove old frames and packaging, vacuum work areas and wipe down new frames and glass. Every window is tested before we leave, so each room is ready to use as soon as we finish.
Yes. Apartment window installations often need body corporate approval, booked lifts or loading bays and careful planning for access at height. We can provide documentation for owners corporation approvals and plan the work to suit building rules and neighbours. Acoustic glazing is a popular choice for apartments on busy roads.
Call us on 0499 090 079 or send your details through our contact form, including your suburb, the number of windows and photos if you have them. We aim to respond to enquiries within one business day and will book a free measure and quote for your Melbourne property.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
