A well-placed skylight can turn a dim hallway, internal bathroom or south-facing kitchen into one of the brightest spaces in the house. We provide skylight installation in Brighton for period homes, family residences, extensions and new builds, as well as offices and shops that need more natural light. Our crew installs fixed, opening and tubular skylights, and replaces old units that have started to leak or discolour.
Planning comes first. Before we cut into a roof we check the framing, the roof covering, the ceiling space and the path of the sun, so the skylight lights the room evenly without creating glare, heat build-up or leaks.
Many Brighton homes pair a heritage front with a modern rear extension, so we often fit skylights into new flat or skillion roofs while leaving the original street-facing roofline untouched.
In short: Hustle Installations is a Melbourne installation team that supplies and fits skylights for homes and businesses in Brighton. Price mainly depends on skylight type, size, glazing, roof covering and access. We aim to reply to every enquiry within one business day, and the roof inspection and quote are free.
Brighton’s period homes often have deep floor plans, with long central hallways and middle rooms that receive little direct light. Contemporary rebuilds bring a different challenge: wide open-plan living areas where the centre of the house can still feel dim on a grey winter afternoon. At the same time, bayside summers are bright and southerly fronts push rain hard across roofs, so a skylight here has to deliver daylight without overheating the room or letting water in.
We start by looking at how you use the space and where the light needs to land, then check the roof pitch, covering and ceiling cavity before recommending a skylight type and glazing. Our installers cut in, frame, flash and finish each unit themselves, so you deal with one team from inspection to handover. You get honest advice, a clear written quote and a tidy home at the end. Find out more about our skylight installation services across Melbourne.
Brighton’s position on the bay shapes how a skylight should be specified and installed. These are the issues we plan for most often:
Wind-driven rain at the flashing. Southerly storms can drive water sideways and up under poorly lapped flashing. We use flashing kits designed for the roof covering and seal each junction so water is carried around the skylight, not into the ceiling.
Salt on frames and fixings. Homes close to the foreshore see fine salt settle on everything. Choosing suitable frame finishes and corrosion-resistant fixings helps an opening skylight keep working smoothly for years.
Heritage rooflines. Parts of Brighton are covered by Bayside City Council heritage overlays. A skylight visible from the street may need a planning permit, so we often place units on rear roof planes where they light the room without changing the streetscape.
Strong summer sun. Clear glass on a north- or west-facing roof can make a room uncomfortable. Low-E or tinted glazing keeps the light while cutting heat and glare.
Every Brighton roof and room is different, so we tailor the scope to your home. Your skylight installation can include:
As a general guide, a tubular skylight in Brighton costs around $600 to $1,200 installed, a fixed glass skylight usually sits between $1,200 and $3,000, and opening, electric or large custom units range from about $3,000 to $6,000 or more. Your final price depends on:
Want an exact figure? Book a free roof inspection and quote for your Brighton home.
Cutting a new opening into a roof needs care inside and out. On Brighton jobs we plan the skylight position around rafters and ceiling joists, protect the rooms below with drop sheets and dust barriers, and keep the roof open for as short a time as possible, watching the forecast so the work is not caught by a southerly change.
Here is how each skylight project runs from first call to handover:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
Brighton (VIC 3186) is in the City of Bayside, about 11 km south-east of the Melbourne CBD. We install skylights throughout the suburb, from period homes near the Church Street and Bay Street shopping strips to modern residences along the Esplanade, around Green Point and in the streets behind Middle Brighton Pier and the Dendy Street Beach bathing boxes.
Our team travels from our Bayswater North base, usually around an hour depending on traffic, and we also work in Brighton East, Sandringham, Gardenvale, Hampton, Elsternwick and Elwood. If your home is covered by a Bayside City Council heritage overlay, a skylight visible from the street may need a planning permit, so we are happy to provide product details for your architect or council application.
Choosing an experienced team for skylight installation in Brighton avoids problems that often only show up a season or two later. Long Victorian hallways and internal bathrooms are usually narrow, and a badly placed unit ends up lighting the ceiling rather than the room. Ensuites without opening windows tend to collect condensation and mould, and many older homes still have acrylic dome skylights from decades ago that have yellowed, cracked or started dripping after heavy rain.
We solve these problems by matching the skylight to the space: compact tubular skylights for narrow halls and robes, opening or electric units that let steam and hot air escape, and new flashing whenever we replace an old dome. Where an old skylight has leaked, we check the surrounding rafters and plaster for hidden water damage before closing up. Every installation is framed, sealed and finished by our own installers, and we explain the options clearly before any work starts.
What sets us apart:
We recommend fixed, opening or tubular skylights based on the room, the roof and the light you want, not on what is easiest to sell.
We specify flashing, fixings and glazing for salt air, southerly storms and strong summer sun, and plan skylight positions around Brighton's heritage rooflines.
Our installers cut, frame, flash and seal every skylight carefully so it stays watertight through Melbourne's heavy downpours.
You receive an itemised written quote and plain-English updates, so you always know what is happening and when.
We protect floors and furnishings below the opening, contain ceiling dust and clean up thoroughly inside and out.
We follow safe work practices on every roof and install to manufacturer specifications and relevant Australian Standards where required.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
We provide skylight installation in Brighton for period homes, rebuilds, extensions and commercial premises. That covers fixed glass skylights, manual and electric opening skylights, tubular skylights for small spaces, and replacement of old or leaking units. We also handle the light shaft, ceiling finishing and blinds, so one team looks after the whole job from roof to room.
As a general guide, tubular skylights cost around $600 to $1,200 installed, fixed glass skylights about $1,200 to $3,000, and opening, electric or large custom units from about $3,000 to $6,000 or more. Roof covering, glazing, shaft length and access all affect the final figure, which we confirm after a free on-site inspection.
It depends on the property. If your home is covered by a Bayside City Council heritage overlay, a skylight that can be seen from the street may need a planning permit, while one on a rear roof plane often faces fewer constraints. We recommend checking with council early, and we can supply product details for your application.
Not if it is specified correctly. Low-E, tinted or double-glazed glass reduces heat gain and glare, and an opening skylight lets warm air escape at ceiling level. Blinds add further control on north- and west-facing roofs. We assess orientation and how the room is used during the inspection, then recommend glazing that suits your Brighton home.
Yes. We remove the old acrylic dome and its flashing, check the surrounding timber for water damage and install a new skylight with fresh flashing and seals matched to your roof. In many cases the existing shaft can be reused, which keeps ceiling work and cost down while giving you clearer glass and better weather protection.
A tubular skylight is usually the best fit. It collects daylight on the roof and channels it down a reflective tube to a neat ceiling diffuser, so it suits tight spaces where a full shaft would be impractical. For bathrooms that need ventilation as well as light, a small opening skylight can be a better choice.
Most tubular skylights are installed within a few hours, and a standard fixed or opening skylight is usually completed in a day. Larger units, new light shafts or repairs to damaged framing take longer, and custom glazing can carry a lead time of a few weeks. We confirm the expected timeline in your written quote.
Yes. We cover floors and furniture before cutting the ceiling, contain dust while we work and remove offcuts, old flashing and packaging when we finish. Gutters and roof surfaces are cleared of debris, and the room below is vacuumed and wiped down, so your home is ready to use as soon as we leave.
Along with Brighton, we regularly install skylights in Hampton, Brighton East, Sandringham, Gardenvale, Elsternwick, Elwood and Bentleigh, plus many other suburbs across Melbourne. Our crew travels from Bayswater North, so we can usually book a roof inspection in the Bayside area at a time that suits you.
Call us on 0499 090 079 or send your details through our contact form, ideally with a photo of the room and the roof. We aim to respond within one business day and will arrange a free inspection and written quote for your Brighton property.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
