Melbourne’s shopping strips are competitive, and the shopfront is often what decides whether someone walks in. A frameless glass front gives passers-by a clear view of your products, your fit-out and the people inside, which is hard to achieve with heavy aluminium framing.
We install structural shopfronts for new tenancies, rebrands and refurbishments across the city and suburbs. Our work includes full-height glass with fins or channels, frameless entry doors, corner glazing and replacement panels for existing frameless fronts, coordinated with your shop fitter and landlord.
In short: Hustle Installations supplies and installs shopfront structural glazing across metropolitan Melbourne. Cost depends on panel size, glass type, the support system, door hardware and street access. We aim to respond to enquiries within one business day and offer a free site measure and quote.
From Chapel Street boutiques and Acland Street cafes to suburban centres and new mixed-use podiums, Melbourne retailers are trading in very different buildings. Many inner-city tenancies sit in Victorian or Edwardian shop buildings with narrow frontages, while newer developments offer tall, open shopfronts ready for glass. In both cases, the shopfront has to look good, lock up securely and cope with constant foot traffic.
We design each shopfront around the tenancy. We check the opening, the floor and head conditions, how customers enter and what the landlord or council requires. Then we recommend glass, fins and a door setup that suits the space and budget. For general information about the support methods we use, see our shopfront structural glazing page, or explore the wider range on our structural glazing page.
A shopfront on a Melbourne strip faces conditions that a suburban showroom may not.
Heritage overlays. Many shopping streets in the inner suburbs are covered by heritage controls. Replacing a street-facing shopfront may need a planning permit, so it pays to check with council before ordering glass.
Tram and traffic noise. Cafes and retailers on tram routes deal with constant noise. Laminated glass can help keep the inside calmer for customers.
Afternoon sun. West-facing fronts heat up quickly on summer afternoons, which affects comfort and can fade stock. Performance glass helps manage this.
Narrow footpaths. Busy strips leave little room for lifting large panels, so installs are often planned for early mornings or after close.
We can deliver a complete frameless shopfront or upgrade part of an existing one.
As a general guide, frameless shopfront glazing in Melbourne costs around $700–$1,400 per m² installed. Larger engineered fronts that use structural silicone or extensive fin systems can move into the $900–$1,800+ per m² range. The final price is confirmed after a free measure. Key drivers include:
Ready for a firm number? We will measure your Melbourne shopfront and send an itemised quote.
Melbourne shopfronts are installed to suit your fit-out dates and trading hours.
Most shopfronts go in during a busy fit-out or a short refurbishment closure. We coordinate with your shop fitter on timing, book delivery for times when the strip is quiet and set up barriers to keep pedestrians clear. If the front has to come out on an existing store, we plan the work so the premises can be secured the same day.
Each Melbourne shopfront follows four steps:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
We are based on Bayfield Road East, Bayswater North (VIC 3153), in the City of Maroondah, and install shopfront structural glazing across metropolitan Melbourne. That includes strips such as Chapel Street in Prahran and Windsor, Acland and Fitzroy Streets in St Kilda, Burke Road in Camberwell and the Kingsway in Glen Waverley. Travel is around 25 minutes to Glen Waverley and Doncaster, about 45 minutes to the inner south-east and roughly an hour to bayside, depending on traffic.
For more on glazing in specific areas, see our commercial glazing pages for Prahran, Windsor, St Kilda and Camberwell.
Melbourne shop owners often contact us after a frameless front has started to fail: doors that swing shut too hard or will not latch, glass that has been chipped by trolleys and bikes, or silicone that has blackened and pulled away. Others have a fit-out deadline and need a glazier who will turn up on the day promised.
We keep the process simple. We confirm the design, hardware and approvals early, coordinate with your shop fitter and install with our own team. You get a shopfront that shows off your business, locks up properly and suits the street it sits on.
What sets us apart:
We know how frameless fronts need to look, lock and perform for retail trade.
Glass and hardware are chosen for Melbourne's sun, wind, noise and busy footpaths.
We work with shop fitters and landlords to meet your opening date.
Glass, supports, doors and access costs are listed before work starts.
The team that measures your shopfront also installs it.
Glass is cleaned and waste removed so you can open straight away.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Yes. We install shopfront structural glazing across metropolitan Melbourne, from inner-city strips in Prahran, Windsor and St Kilda to suburban centres in the east and south-east. Our Melbourne shopfront work includes frameless glass fronts, glass fins, entry doors and replacement panels for retailers, cafes, bars and showrooms.
As a general guide, frameless shopfront glazing costs around $700–$1,400 per m² installed in Melbourne, with larger engineered fronts reaching $900–$1,800+ per m². Door hardware, glass type, access and approvals affect the final figure. We confirm the price with an itemised quote after a free site measure.
Possibly. Many Melbourne shopping strips are covered by heritage overlays, and changing a street-facing shopfront may need a planning permit. Requirements differ between councils, so we recommend checking with your council early. We can supply drawings and product details and suggest designs that suit the character of the street.
Yes. On busy Melbourne strips we often install early in the morning or after close to avoid crowded footpaths and keep customers safe. Where we are replacing an existing front, we plan the work so the store can be closed in and secured on the same day.
Laminated glass and well-sealed joints can noticeably reduce noise from trams, traffic and busy footpaths, which helps cafes, restaurants and clinics on main roads. The improvement depends on the glass build-up and how many gaps remain, such as around doors. We can talk through acoustic options during the site measure.
Most shopfronts are installed in one to three days once glass and hardware are ready. Fabrication lead times depend on the glass specification, so we confirm dates when you accept the quote. We fit the install around your fit-out program and opening date wherever possible.
Yes. We remove packaging, offcuts and any old glass or frames, clean the new panels and leave the footpath and floor tidy. Our aim is for your shopfront to be ready for signage and trading as soon as we hand over.
Yes. We replace cracked or broken panels, reseal failed joints and adjust or replace door hardware on existing frameless shopfronts. Replacement glass is matched to the existing type and thickness where possible, and we can help make the opening secure while the new panel is made.
We cover metropolitan Melbourne, including Prahran, Windsor, South Yarra, St Kilda, Richmond, Hawthorn, Camberwell, Glen Waverley, Doncaster and Oakleigh. Our base in Bayswater North is around 25 minutes from Glen Waverley and about 45 minutes from the inner south-east, depending on traffic.
Call us on 0499 090 079 or send your details through the contact form on our website. Photos of the current front, the shop address and your fit-out dates help us prepare. We will arrange a free measure and send an itemised quote for your Melbourne shopfront.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
