Melbourne homeowners rarely need just one thing done. A typical project might combine new bedroom windows, double glazing for the living room and a sliding door to the back deck. Our residential window installation service in Melbourne brings all of that together.
We measure, recommend frames and glass for each room, order to size and install with proper flashing, sealing and trims. You can choose supply and install or have us fit windows you have already purchased.
Work can be completed in one go or staged to suit your budget.
In short: Hustle Installations offers a complete residential window installation service across Melbourne, covering replacements, double glazing, sliding doors and extensions. Price depends on scope, glass, frame removal and access. We aim to respond to enquiries within one business day and every job starts with a free measure and quote.
Melbourne’s housing stock spans more than a century, and each era tends to need a different mix of services. Victorian and Edwardian homes often need sympathetic replacement of tired front windows and a modern rear extension. Post-war weatherboards and brick veneers commonly have leaky aluminium or timber windows that benefit from double glazing. Units and townhouses may need quieter glass on busy roads, while newer homes might just need a larger sliding door to open up to the garden.
Our service covers all of these under one plan. We look at the whole house, suggest priorities and give you an itemised quote, so you can decide what to do now and what can wait. Read more about our approach on our residential window installation page, or see what the full service includes on our residential window installation service page.
These are the most common reasons Melbourne homeowners book our service:
Heat loss in winter. Single-glazed windows in older homes let warmth escape on cold nights, making heaters work harder and rooms feel chilly near the glass.
Overheating in summer. West-facing windows and large unshaded glass can turn rooms into hot boxes on north-wind days.
Traffic and tram noise. Homes on busy roads and tram routes benefit from well-sealed frames and laminated or double-glazed units.
Renovations that raise the bar. New homes in Victoria are built to a 7-star energy standard under NCC 2022, and many renovators want their existing rooms to feel just as comfortable as the new extension.
We help you prioritise the windows that will make the biggest difference.
Pick the services you need, or let us manage the whole package.
As a general guide, a standard aluminium window supplied and installed in Melbourne costs around $600 to $1,500. Double-glazed or larger windows generally range from about $1,200 to $3,000 or more, and install-only work starts from around $250 per opening. The total for your service depends on:
Want an itemised quote? We will measure your Melbourne home for free.
Once you approve the quote, we confirm the order and give you a realistic delivery window. Installation dates are chosen around settled weather and your household’s routine, and if your project is staged, we keep frames and finishes consistent across each visit.
The service follows four steps:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
We operate from Bayfield Road East in Bayswater North (VIC 3153), in the City of Maroondah, and provide our residential window service throughout metropolitan Melbourne. That includes Kew, Hawthorn and Camberwell in the inner east, Burwood and Box Hill further out, South Yarra and Caulfield in the south-east, and Bentleigh and Brighton towards the bay. Travel is around 25 minutes to Doncaster or Glen Waverley, about 45 minutes to the inner south-east and roughly an hour to bayside, depending on traffic.
Explore local projects on our window installation pages for South Yarra, Kew, Bentleigh and Caulfield.
Melbourne homeowners often tell us how hard it was to coordinate a previous window project. The supplier delivered late, the installer and carpenter blamed each other for gaps around the frames, and nobody would take responsibility for a door that leaked during the next big storm. Others bought cheap windows that did not suit their home’s exposure to wind and rain.
Some started an upgrade, ran out of budget halfway and ended up with mismatched frames across the house.
Our service avoids these problems. We plan the whole house, quote every window clearly and take responsibility for supply and installation together. If the work is staged, we keep a record so later windows match. You always have one contact and one team accountable for the result.
What sets us apart:
Our residential window installation service covers advice, supply, fitting and finishing.
Glass and sealing are chosen for cold winters, hot north winds and wind-driven rain.
We help you prioritise which windows to upgrade first.
Split the work into stages and keep frames and finishes consistent.
Every window and door is priced individually so you can plan your budget.
A single team is responsible for supply, installation and follow-up.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Our residential window installation service in Melbourne includes a whole-of-house assessment, advice on frames and glass, itemised quoting, ordering, removal of old windows, installation, sealing, trims and clean-up. It covers replacements, double glazing, sliding and stacking doors and windows for extensions, with supply and install or install-only options.
As a general guide, a standard aluminium window supplied and installed costs around $600 to $1,500, double-glazed or larger windows about $1,200 to $3,000 or more, and install-only work from around $250 per opening. The total depends on how many windows are included and your glass choices.
Yes. Many Melbourne homeowners start with the rooms that feel coldest or noisiest and complete the rest later. We record the frame colours, profiles and glass used so that later stages match, and we can adjust the plan if your priorities change.
Usually the living areas and bedrooms that are used most, especially those facing south in winter or west in summer. Windows on busy roads or tram routes are also good candidates for acoustic or double glazing. We can walk through the house with you and suggest priorities.
Like-for-like window replacement often does not need a permit, but homes under a heritage overlay may need planning approval for changes visible from the street, and extensions generally need building approval. Requirements vary, so check with your council or building surveyor before ordering.
Windows are made to order, so there is a manufacturing lead time after you approve the quote, which we confirm at ordering. On site, a few windows can be completed in a day and a whole house usually takes several days. We give you clear dates before work begins.
Yes. We can install windows you have bought elsewhere, provided they suit the openings. We recommend we check sizes and specifications before they are delivered, as windows that do not suit Melbourne's wind and rain exposure or the opening size can cause problems later.
Yes. We remove the old windows and packaging, vacuum the work areas, wipe down sills and glass and put furniture back in place. Clean-up and disposal are included in every quote, so there are no surprise charges at the end.
We cover metropolitan Melbourne from our Bayswater North base, including Kew, Hawthorn and Camberwell, South Yarra and Caulfield, and Bentleigh and Brighton near the bay. If you are unsure whether we service your suburb, give us a call and we will let you know.
Call 0499 090 079 or use our contact form to tell us your suburb and what you would like done. We aim to respond within one business day and will arrange a free assessment, measure and itemised quote for your home.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
