Across Melbourne’s middle-ring suburbs, older houses are being replaced with larger, more energy-efficient homes, and windows are a big part of how those homes perform. Our new home window installation in Melbourne covers aluminium windows, double-glazed units and large sliding and stacking doors for new builds.
We review your window schedule, measure the frame openings, install each unit level and plumb, and flash it to suit the wall wrap and cladding. We work directly with your builder, or with you if you are an owner-builder.
Our aim is windows that match the approved design and arrive on time.
In short: Hustle Installations provides new home window installation across Melbourne for owners, owner-builders and small builders. Cost depends on the window schedule, glass specification, door sizes and access. We aim to respond to enquiries within one business day and offer a free quote from your plans.
If you are building a new home in Melbourne, your windows have to satisfy the energy rating, the building surveyor, your designer’s vision and your budget. On knockdown-rebuilds in suburbs such as Burwood, Oakleigh or Balwyn, large living areas open to the back garden through wide sliding or stacking doors, while upstairs bedrooms need windows that balance light, privacy and heat gain. Each of those choices affects the energy assessment that supports your building permit.
We get involved early, review the window schedule against the plans and energy report, and highlight anything that might cause a problem before ordering. On site, we coordinate with your builder so windows go in when the frame and wrap are ready. To see our wider work in homes, visit our residential window installation page, and for general advice on new builds, see our new home window installation page.
New homes in Melbourne bring a few local factors that shape window choices and timing:
The 7-star energy standard. New homes in Victoria must generally meet a 7-star energy rating under NCC 2022, and window size, glass and frame type play a major part in achieving it.
Bushfire-prone land. Some outer east sites, such as those near the Dandenong Ranges and Yarra Ranges, are bushfire-prone, and windows may need to meet AS 3959 for the assessed BAL.
Wet winter sites. Melbourne’s winter rain can delay frames, wrap and roofing, so window installation needs to stay flexible within the programme.
Narrow blocks and tight access. Subdivided lots and townhouse developments often have limited room for deliveries and lifting large glazed doors.
We plan around each of these with you and your builder.
We look after the window package for your new home from schedule to handover.
As a general guide, a standard aluminium window supplied and installed on a Melbourne new build costs around $600 to $1,500. Double-glazed or larger windows usually range from about $1,200 to $3,000 or more, and installation only for windows supplied by your builder starts from around $250 per opening. Your total depends on:
Plans approved? Send them through for a free quote on your Melbourne build.
We keep in touch with your builder or site supervisor as the frame goes up and adjust our timing if winter rain pushes the programme back. Once the wrap is on, we install efficiently and protect the frames so plasterers and renderers can follow straight away.
Our process runs in four stages:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
We work from Bayfield Road East in Bayswater North (VIC 3153), in the City of Maroondah in Melbourne’s outer east, which keeps us close to new builds in the eastern suburbs and the foothills of the Dandenong Ranges. We also install windows on new homes across metropolitan Melbourne, from Doncaster and Mount Waverley to Camberwell, Oakleigh and Bentleigh, and down to bayside rebuilds in Hampton. Travel is around 25 minutes to Doncaster or Glen Waverley, about 45 minutes to the inner south-east and around an hour to bayside, depending on traffic.
See our local work on the window installation pages for Burwood, Oakleigh, Camberwell and Hampton.
Melbourne owners building new often tell us about window installers who did not turn up when the frame was ready, leaving the house exposed to winter rain and holding up the plasterer. Others discovered at the final inspection that the glass installed did not match the energy report, or that large sliding doors were not level and would not lock.
Some owner-builders were never told how the window flashing should tie into the wrap, and found water stains inside after the first heavy storm.
We work differently. We check your documents early, agree dates with your builder and communicate if anything changes. Every window is installed and flashed carefully, protected through the rest of the build and adjusted before you move in, so your new home performs as designed.
What sets us apart:
Our new home window installation team understands frame, wrap and cladding sequencing.
Windows are installed to match 7-star energy specs and flashed for wet Melbourne winters.
We review your window schedule against the drawings and energy report before ordering.
We agree dates with your builder and adjust if the programme changes.
Clear guidance on timing, flashing and protection if you are running your own build.
Every window and door is tested and adjusted before you move in.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
New home window installation in Melbourne starts with reviewing your window schedule against the plans and energy report. Once the frame and wrap are ready, we install each window level and plumb, flash it to suit the wall and protect it for the rest of construction. Before handover, we test and adjust every window and door.
As a general guide, a standard aluminium window supplied and installed costs around $600 to $1,500, while double-glazed or larger windows are about $1,200 to $3,000 or more. Installing builder-supplied windows starts from around $250 per opening. We provide a free quote from your plans.
Many new Melbourne homes use double glazing to help reach the 7-star energy rating required under NCC 2022 in Victoria, but the exact requirement depends on your design and energy assessment. Follow the window performance values in your energy report, and have any changes reassessed before ordering.
Possibly. Sites in bushfire-prone areas, including parts of the Dandenong Ranges and Yarra Ranges, are assessed for a Bushfire Attack Level, and windows may need to meet AS 3959 for that BAL. Your building surveyor will confirm what applies, and we can install windows to suit the specified level.
Windows are usually installed after the frame is up, the roof is on and the wall wrap is in place, before cladding, brickwork or render is finished. Timing varies by builder and wall type, so we coordinate directly with your builder or site supervisor.
Melbourne winters often push back frame and roofing stages. We keep in touch with your builder and move our installation date as needed, so windows go in when the site is genuinely ready rather than being forced into an unsuitable opening.
Yes. We regularly help owner-builders with new home window installation. We explain when the frame needs to be ready, how the flashing should tie into the wrap and how to protect the windows during the rest of the build, so you avoid common and costly mistakes.
Yes. We remove packaging and waste from our work, leave each opening tidy for the next trade and return before handover to check and adjust windows and doors. Frames are protected so they stay clean while plastering, rendering and painting are completed.
We cover new builds across metropolitan Melbourne from our Bayswater North base, including Doncaster, Burwood, Mount Waverley, Camberwell, Oakleigh and Bentleigh, bayside areas such as Hampton, and the outer east near the Dandenong Ranges. Contact us if you are unsure about your location.
Call us on 0499 090 079 or send your plans, window schedule and build address through our contact form. Let us know your expected frame stage date. We aim to respond within one business day and will prepare a free quote for your Melbourne new home.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
