On many commercial jobs the windows go to one contractor and the doors to another, which leaves gaps in responsibility at the very places that matter most: the junctions, the finishes and the hardware. When one team installs both, the frames line up, the colours match and there is a single point of contact if anything needs attention.
We install aluminium windows, glazed framing, entry doors, sliding and swing doors and back-of-house doors for offices, shops, clinics, hospitality venues and mixed-use buildings. That covers new builds, refurbishments and like-for-like replacements in occupied premises.
In short: Hustle Installations supplies and installs commercial windows and doors as one coordinated package for builders, owners and businesses. Pricing depends on the number of openings, frame system, glass, door hardware and site access. We aim to respond to enquiries within one business day, and measures and quotes are free.
A commercial building is only as weathertight and secure as its weakest opening. Windows and doors share the same facade, the same flashings and often the same frame system, so treating them as separate packages tends to create mismatched sightlines, duplicated site visits and finger-pointing when a leak or a sticking door appears after handover.
Our approach is to schedule every opening together. We review the drawings and the window and door schedules side by side, confirm frame colours, glass types and hardware before ordering, and sequence the installation so each elevation is closed in efficiently. Doors receive the same attention as windows: closers, locks and seals are adjusted on site rather than left for someone else. You can learn more about our wider commercial windows service, including the frame systems we work with.
These are the issues we are most often asked to sort out on commercial buildings.
Mismatched frames and finishes. Windows and doors ordered from different suppliers can end up in slightly different colours, profiles or glass tints, which is obvious on a street-facing facade.
Leaks at the junctions. Where a door frame meets an adjoining window or sidelight, unclear responsibility for flashing and sealing is a frequent source of water entry.
Hardware left unfinished. Doors hung without closers adjusted or locks set correctly slam, drag or fail to latch, which quickly becomes a security and safety concern.
Programs that slip. Two contractors means two schedules, and delays on one often hold up the other, along with the trades waiting behind them.
We can take on the full envelope package or the parts you need.
Every package is priced from the actual schedule of openings. The main factors are:
Looking for typical figures? Our commercial windows and doors Melbourne page sets out indicative price ranges, or send us your schedule for a free quote.
Treating windows and doors as a single scope lets us order matching products, avoid duplicate site visits and close in each elevation in one sequence. It also means one team is accountable for how the openings perform once the building is in use.
Our four-step process:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
Commercial windows and doors usually come from heavier aluminium suites than residential products, with deeper frames, stronger sections and hardware rated for constant use. Windows and external glazed doors are generally rated under AS 2047, and glass is selected and installed to AS 1288, which governs where safety glass is needed, such as in doors and low panels. For entries used by the public, door width, thresholds and hardware may also need to address AS 1428.1 where required.
Beyond compliance, the right choices depend on how the building is used. Double glazing or performance glass helps with comfort and noise in offices, laminated glass adds security at street level, and powder-coated or anodised finishes can be matched across every opening. We talk through these options early so the package suits the building, the budget and the people using it.
Clients usually come to us after a job where the windows and doors were split between trades. The facade looked patchy, nobody wanted to own the leak beside the entry, and the doors were never properly adjusted before handover. Others have dealt with installers who arrived without the right hardware, or left glass and frames scratched and dirty.
We set things up differently. One team plans, orders and installs every opening, raises questions about the schedule before products are made, and finishes each door properly rather than leaving it for a locksmith. Communication is straightforward, and you deal with the same people from quote to completion.
What sets us apart:
One team plans, supplies and installs every opening so nothing falls between contracts.
Frames, colours and glass are matched across windows, doors and sidelights.
Closers, locks and seals are adjusted on site before we sign off each door.
We sequence work by elevation to suit the builder's program or your trading hours.
We check schedules and openings before ordering to avoid remakes and delays.
We follow site rules, protect finished surfaces and remove our waste daily.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Using one installer for commercial windows and doors means matching frames and finishes, one schedule and one team responsible for the junctions where leaks and gaps usually appear. It also cuts down on site visits and coordination for the builder or owner. If something needs adjusting after handover, you know exactly who to call.
We work on offices, retail shops, clinics, cafes and restaurants, showrooms, light industrial units and mixed-use buildings. Jobs range from a single entry door and adjoining windows through to full facade packages on new builds. We also replace windows and doors in occupied buildings, staging the work so the premises stay secure.
In many cases, yes. We identify the frame profile and finish of your existing commercial windows and source doors in a matching or closely compatible system. Where an exact match is no longer available, we suggest options that keep the facade looking consistent, such as matching colours and sightlines, and show you samples before ordering.
Yes. Double glazing is common in offices and buildings facing busy roads because it helps with comfort, energy use and noise. Glass doors and sidelights can also be double-glazed where the frame system allows. We confirm the glass specification for each opening, including any safety glass requirements, before ordering.
Windows and external glazed doors are generally rated under AS 2047, and glass selection and installation is covered by AS 1288. Public entrances may also need to consider AS 1428.1 for access where required. We install to suit the specified products and project documents, and can provide product information for your records on request.
Yes. For occupied buildings we can schedule noisy or disruptive work outside trading hours where practical, and replace openings in stages so the building is never left open overnight. We agree on timing, access and any building management requirements before starting, so tenants and customers are affected as little as possible.
It depends on the number of openings, the frame system and manufacturing lead times. Small replacement jobs can be installed in a day or two once products arrive, while larger packages are staged over several weeks to suit the program. We give you a realistic timeline in the quote and keep you updated as products are made.
We can supply and install the full package, or install windows and doors that you or the builder have supplied, provided they are suitable for the openings and arrive with the correct components. Supply and install gives you one point of responsibility, which is usually the simplest option for commercial windows and doors.
Yes. We remove packaging, offcuts and old frames from our work areas, clean down new frames and glass, and leave each opening ready for use. On construction sites we follow the builder's waste and housekeeping rules, and in occupied premises we tidy up at the end of every shift.
Call us on 0499 090 079 or send your details through the contact form. If you have drawings or a window and door schedule, include them so we can review the scope before a site visit. We aim to respond within one business day and provide a free measure and written quote.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
