Aluminium windows are the most common choice in Melbourne homes, from new estates and knock-down rebuilds to extensions on period houses. They are strong, low-maintenance and available in slim, modern profiles and double-glazed options.
We install aluminium windows across metropolitan Melbourne, replacing tired timber and old single-glazed frames and fitting complete window packages on new builds. Every job starts with an accurate site measure. We then remove old frames where needed, fix the new windows square and level, flash and seal them against wind-driven rain, and finish the reveals neatly.
In short: Hustle Installations is a Melbourne-based window and door installation team supplying and fitting aluminium windows for homes and builders. Cost depends on window size, glass type, number of windows and access. We aim to respond to enquiries within one business day and provide a free measure and quote.
Melbourne homes face long cold spells, hot northerly days and sudden changes, so windows need to seal well and keep their shape. Many houses built from the 1960s to the 1980s still have original single-glazed aluminium or timber windows that rattle, leak and let heat escape. New homes, meanwhile, are designed to higher energy standards and rely on windows that are installed exactly as specified.
Our approach suits both. For replacements, we assess each opening, recommend frame and glass options and install the new windows with minimal disruption. For new builds, we work to the window schedule and builder’s program, coordinating with wraps, flashings and cladding. Either way, you get clear communication, tidy work and windows tested before handover. Learn more on our main aluminium window installation page, or see our aluminium window supply service.
Several local factors influence how aluminium windows should be specified and installed in Melbourne.
Temperature swings. Cold winters and hot summer days make single glazing uncomfortable. Double glazing and good perimeter sealing make a real difference.
7-star new homes. New homes in Victoria are designed to the 7-star energy standard under NCC 2022, so windows must be installed to perform as the energy assessment assumes.
Traffic and aircraft noise. Homes near main roads, rail lines or flight paths benefit from laminated or acoustic glazing.
Bushfire-prone outer areas. In parts of the Dandenong Ranges and Yarra Ranges, AS 3959 can affect window and glass selection.
We cover all common aluminium window types and installation needs.
As a general guide, a standard aluminium window supplied and installed in Melbourne costs from around $500 to $1,500, while double-glazed windows typically range from about $900 to $2,500. Large sliding or stacking doors cost more. Your price depends on:
Want your exact cost? Book a free measure and we will provide an itemised quote.
On replacement jobs in occupied homes, we plan the order of works so rooms are not left open overnight, protect floors and furniture and clean up daily. On new builds in growth areas and rebuild suburbs, we schedule around the builder’s program and confirm openings before the windows are made. Either way, each window is checked for operation and sealing before we move on.
Our four steps:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
We are based on Bayfield Road East in Bayswater North VIC 3153, in the City of Maroondah in Melbourne’s outer east. From there we install aluminium windows across metropolitan Melbourne, including the eastern suburbs, inner east, south-east and bayside. Travel is around 25 minutes to Doncaster or Glen Waverley, about 45 minutes to the inner south-east and roughly an hour to bayside suburbs, depending on traffic.
For local details, see our pages on aluminium window installation in Kew, Doncaster, Glen Waverley and Brighton. If your suburb is not listed, get in touch anyway, as we work right across the metro area.
Melbourne homeowners often come to us after living with draughty, condensation-prone windows for years, or after a previous installer left leaks at the sills that only showed up in the first heavy rain. Builders need a window installer who arrives when booked and does not create rework for plasterers and painters.
We measure carefully, seal every window properly and keep you informed at each step. Our team knows Melbourne housing, from brick veneer homes in the east to period houses closer to the city, and adapts the installation to suit.
What sets us apart:
Aluminium window installation is a core part of what we do every week.
Flashings and seals are detailed for Melbourne's wind, rain and temperature swings.
Every opening is measured on site before windows are ordered.
Sills, heads and jambs are sealed so water stays outside.
We work to your program and coordinate with other trades.
We protect your home and clean up at the end of each day.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Yes. We provide aluminium window installation across metropolitan Melbourne from our base in Bayswater North, covering the eastern suburbs, inner east, south-east and bayside. We supply and install sliding, awning, casement, fixed and double-glazed windows for homeowners, renovators and builders, with a free measure and quote.
As a general guide, a standard aluminium window supplied and installed in Melbourne costs from around $500 to $1,500, and double-glazed windows typically range from about $900 to $2,500. Large sliding or stacking doors cost more. Size, glass, frame removal and access all affect your price, confirmed after a free measure.
Yes. Aluminium is durable and handles Melbourne’s weather well. For comfort in cold winters and hot summers, double glazing and thermally broken frames are worth considering, and good perimeter sealing is essential. We recommend options based on the room, orientation and your budget.
New homes in Victoria are designed to the 7-star energy standard under NCC 2022, and the window specification comes from the energy assessment. Many designs use double glazing to meet it. We install the windows as specified and seal them so the home performs as intended.
Yes. In bushfire-prone parts of the Dandenong Ranges and Yarra Ranges, homes may have a Bushfire Attack Level under AS 3959, which affects window and glass choices. We install windows specified for the relevant level and will ask for your BAL details when quoting.
A few windows can often be installed in a day, while a whole-house replacement may take several days depending on numbers, sizes and access. Windows are made to measure, so manufacturing lead time is usually the main scheduling factor. We confirm timing with your quote.
Yes. We remove old timber or aluminium frames and install new aluminium windows in the existing openings, packing and sealing them carefully because older openings are often out of square. In heritage overlay areas, street-facing changes may need council approval, so check before ordering.
Yes. We remove old frames, packaging and offcuts, vacuum dust around each opening and clean the new glass. Floors and furniture are protected while we work, and we leave your home tidy at the end of each day and at completion.
We service metropolitan Melbourne, including Kew, Hawthorn, Balwyn, Doncaster, Glen Waverley, Mount Waverley, Camberwell, Malvern, Toorak, Brighton, Hampton and many more. Travel is around 25 minutes in the east and about an hour to bayside, depending on traffic. Contact us to confirm your area.
Call 0499 090 079 or use our contact form with your suburb, the number of windows and whether you need supply and install or install-only. Photos help. We aim to respond within one business day and will arrange a free measure and quote for your aluminium window installation in Melbourne.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
