Melbourne’s middle-ring suburbs are full of knock-down rebuilds, dual-occupancy townhouses and large extensions, and every one of those projects needs windows installed at the right moment. Our new window installations in Melbourne are built around that reality: fitting windows to the frame on schedule so lock-up is not delayed.
We install aluminium windows, sliding and stacking doors and fixed glazing into new frames, checking every opening first and flashing each window to suit brick veneer, weatherboard or lightweight cladding.
We also make sure the glass and frames going in match the energy assessment, which matters under Victoria’s 7-star requirements.
In short: Hustle Installations installs windows and doors in new homes, rebuilds and extensions across Melbourne for builders and owner-builders. Cost depends on window numbers and sizes, glass, storey height and cladding. We aim to respond to enquiries within one business day, and quotes from plans are free.
New homes in Melbourne are being built on tighter timelines and to higher energy standards than ever. Builders juggling several sites need window installers who show up when the frame is ready, while owner-builders need someone who can explain sequencing and flashing details clearly. On narrow blocks and townhouse sites, access, staging and neighbour considerations add another layer.
We work from your plans and window schedule, check openings once the frame is up and book installation to suit your program. Every window is installed plumb and square and finished ready for cladding, insulation and plaster. For a broader look at how we approach installations, see our window installations page, or read more about our new window installations service for builds anywhere. We can install windows you have ordered or supply and install together.
New window installations in Melbourne have to account for some specific local factors:
7-star energy standard. Since NCC 2022 was adopted in Victoria, most new homes need to meet a 7-star energy rating. Windows are a major part of that result, so installed glass and frames must match the assessment.
Bushfire-prone outer areas. New homes in parts of the Dandenong Ranges and Yarra Ranges may need windows and glazing that suit the site’s BAL rating under AS 3959 where required.
Narrow blocks and townhouses. Dual-occupancy and townhouse sites often have limited side access, making delivery and handling of large doors harder.
Winter weather at frame stage. Rain and wind can stall a build, so prompt installation helps close the home up.
Each installation is planned around your build, cladding and energy requirements.
As a general guide, a standard aluminium window supplied and installed in a new Melbourne home costs around $600 to $1,500, while double-glazed or larger windows usually range from about $1,200 to $3,000 or more. Installation only for windows supplied by your builder starts from around $250 per opening. Pricing depends on:
Ready to lock in a price? Send your plans for a free Melbourne new build quote.
We fit our work around your builder’s program. We confirm dates early, check the frame before we arrive and keep the site supervisor informed, so plaster, insulation and cladding trades can follow straight on.
Our Melbourne new build installations follow four steps:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
We are based on Bayfield Road East in Bayswater North (VIC 3153), in the City of Maroondah in Melbourne’s outer east. We install windows in new homes across metropolitan Melbourne, with plenty of work in rebuild-heavy suburbs such as Mount Waverley, Glen Waverley, Doncaster and Balwyn, townhouse developments in Bentleigh and Oakleigh, and architect-designed rebuilds in bayside suburbs like Brighton and Hampton. Travel is around 25 minutes to Doncaster and Glen Waverley, about 45 minutes to the inner south-east and roughly an hour to bayside, depending on traffic.
See our local window installation pages for Mount Waverley, Bentleigh, Balwyn and Doncaster for more on our work in those areas.
Melbourne builders tell us the same things go wrong with window installation on new homes: installers who miss dates, windows fitted without proper sill flashing, and glass that does not match what was assessed for the energy rating. Owner-builders often find it hard to coordinate delivery with the frame being ready, especially during wet winters.
We address these issues with clear scheduling, frame checks before installation and careful flashing for each cladding type. We also check that the glazing on site matches the energy report, so the finished home reflects the rating it was designed to achieve.
What sets us apart:
Installation dates are set around your build so lock-up is not delayed.
Flashing, sealing and glazing suit local weather and Victoria's energy rules.
Openings are measured on site before fitting to catch problems early.
We install the glass and frames specified in your energy assessment.
Builders and supervisors are kept informed at every stage.
We aim to respond to enquiries within one business day.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Our new window installations in Melbourne include reviewing your plans and window schedule, checking openings on the standing frame, installing windows and sliding doors plumb and square, and flashing and sealing each one to suit the cladding. We can supply the windows or install units provided by your builder.
As a general guide, a standard aluminium window supplied and installed costs around $600 to $1,500, and double-glazed or larger windows around $1,200 to $3,000 or more. Installation only starts from around $250 per opening. Send your plans for a free quote with exact pricing.
Windows have a major effect on a home's energy rating, which most new homes in Victoria must meet under NCC 2022. The installed glass and frames need to match the performance values in the energy assessment. We check the specified glazing and install it carefully to reduce air leakage.
Yes. New homes in parts of the Dandenong Ranges and Yarra Ranges may need windows and glazing that suit the site's BAL rating under AS 3959 where required. We install products specified for the BAL level and follow the relevant details from your plans and supplier.
We cover metropolitan Melbourne from our Bayswater North base, including rebuild areas such as Mount Waverley, Glen Waverley, Doncaster and Balwyn, townhouse developments in Bentleigh and Oakleigh, and bayside rebuilds in Brighton and Hampton. Contact us for projects in other areas.
Book as early as possible, ideally when your window order is placed. We pencil in a date and confirm it once the frame is up and the roof is on. Early booking helps avoid delays, particularly during busy periods and wet Melbourne winters when builders are keen to reach lock-up.
Most single-storey homes take one to a few days, while double-storey homes and builds with large stacking doors can take longer. Access on narrow townhouse sites can also affect timing. We confirm the expected timeframe in your quote so your builder can plan the next trades.
Yes. We remove packaging, offcuts and waste from our work areas and leave the site tidy for the next trade. Protective films are usually left on frames until the builder is ready, protecting the finish during the rest of construction.
Yes. Many Melbourne builders order windows through their own suppliers. We install supplied windows where they suit the openings and arrive with the right components, and we check sizes before installation day. We can also supply and install if you prefer one team to manage both.
Call us on 0499 090 079 or send your plans, window schedule, energy report and build timing through our contact form. We aim to respond to enquiries within one business day, and quotes for new window installations in Melbourne are free.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
