Installing an automatic door combines several trades: glazing, framing, mechanical fitting, sensor setup and coordination with electrical work. The quality of the installer shows in the details, such as how level the track sits, how smoothly the leaves run and how carefully the safety sensors are set.
Our installers handle the whole job from site assessment to commissioning. We arrive when we say we will, keep you informed, work cleanly and explain how your new door works before we leave.
In short: Hustle Installations is a team of automatic door installers serving businesses, strata and homeowners. Pricing depends on door type, size, operator, glass and controls. We aim to respond to enquiries within one business day, and every job starts with a free assessment and quote.
A capable installer does more than bolt an operator above a door. They check whether the header and frame can carry the load, confirm the opening is square, plan the power supply with the electrician, and choose sensor positions that suit how people actually approach the door. After installation, they take time to commission the system rather than leaving it on factory settings.
That is how our team works. We bring practical experience across shopfronts, clinics, offices, apartment lobbies and homes, and we treat every door as a safety device as well as an entry. You get one point of contact, honest advice about what will and will not work, and installers who take pride in a neat finish. To see the full range of work we do, visit our auto door installation page.
We often hear the same stories from clients who had a poor experience elsewhere.
Poor communication. Calls are not returned, installation dates slip and nobody explains what is happening.
Rushed commissioning. Doors left on default settings open too fast, close too soon or trigger for every passer-by.
No safety testing. Sensors that are not properly tested may fail to detect someone in the doorway.
Untidy finish. Visible cabling, gaps around headers, scratched glass and debris left behind.
No follow-up. Once the invoice is paid, the installer is hard to reach when adjustments are needed.
Our installers can manage the full scope of an automatic door project.
The cost of hiring automatic door installers depends on the scope of work as much as the hardware.
For indicative price ranges, see our automatic door installers in Melbourne page. Want an exact quote? We will assess your site for free.
Our installers follow a consistent routine on every job so nothing is missed. Before we start, we confirm the scope, timing and site access with you. On the day we protect the work area, keep the site safe for the public and staff, and communicate if anything unexpected comes up.
Our working method:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
Before committing to an installer, ask how they will assess the opening, which door type and operator they recommend and why, and what is included in the price. A good quote lists the door system, sensors, controls, glass, any building or electrical work, and commissioning. Ask how safety sensors are tested and whether staff or residents will be shown how to use and lock the door.
It is also worth asking about insurance, who will carry out any electrical connection, since new hardwired power must be installed by a licensed electrician, and whether the installer offers servicing afterwards. Where the door is part of an accessible entry, ask how they will account for requirements such as AS 1428.1 where required. Clear answers to these questions are a good sign that the installer will deliver what they promise.
Automatic doors are used by everyone, including children, older people and wheelchair users, so poor installation is more than an inconvenience. A door that closes too fast or does not detect someone in the threshold is a safety risk. Clients also tell us about installers who disappeared after the job, leaving them with a door that needed adjustment and nobody to call.
We take the opposite approach. Our installers commission every door carefully, test its safety functions, keep you informed throughout and stay contactable afterwards. It is a simple standard, but it makes a big difference to how well your door works over time.
What sets us apart:
Our team has hands-on experience with sliding doors, swing operators and retrofits.
We confirm times, explain the plan and keep you updated throughout the job.
Every door is programmed and adjusted to suit its users and traffic.
Sensors and reversing functions are tested before we hand the door over.
Tidy headers, concealed cabling and clean glass are part of every install.
We stay contactable for adjustments, servicing and questions after installation.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Automatic door installers assess the opening, recommend a suitable door and operator, install the track or arm, door leaves, sensors and controls, coordinate the power connection and commission the system. Good automatic door installers also test every safety function, show you how the door works and remain available for adjustments and servicing.
Look for an installer who assesses the site in person, explains why they recommend a particular system, provides a detailed written quote and describes how they commission and test the door. Ask about insurance, servicing and who handles electrical work. Clear, prompt communication during quoting is usually a good sign of how the job will run.
Yes. Our automatic door installers work on shopfronts, clinics, offices, hospitality venues and apartment lobbies, as well as homes that need accessible or convenient entries. The approach is the same: assess the opening, recommend the right system and install it carefully, while adjusting the setup for the people who will use it.
An automatic door needs a suitable power supply, and any new hardwired power must be installed by a licensed electrician. We coordinate the connection with a licensed electrician and confirm the power requirements during the site assessment so there are no surprises on installation day.
Often, yes. Our installers can fit swing door operators to many existing hinged doors, and some sliding doors can also be automated, provided the door, frame and hinges are in good condition and within the operator’s limits. We inspect the door first and will tell you honestly if a new system is the better option.
An operator retrofit on an existing door often takes a day. A new automatic sliding door with glass and framing typically takes one to two days on site once the system is manufactured. Our installers confirm the timeframe in advance and can schedule work outside business hours where practical.
Yes. At handover our installers explain the operating modes, how to lock and unlock the door, what to do if the power goes out and how to reset it if needed. For businesses, we can brief the staff who open and close the premises so everyone is confident using it.
Yes. Our installers protect the work area, contain dust from drilling or cutting, remove packaging and old hardware, and clean the glass and frames before leaving. The entry is left tidy and ready to use, and clean-up is always included in our quote.
Yes. Automatic doors need periodic checks and adjustments to keep sensors, tracks and operators working safely. We can recommend a servicing schedule based on how busy your door is, and our installers are available for adjustments or repairs if anything changes after installation.
Call us on 0499 090 079 or send your details through our contact form. Tell us about the property, the opening and whether you have an existing door, and include photos if you can. We aim to respond within one business day and will book a free site assessment with one of our installers.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
