Splitting a window job between a supplier and a separate installer often leads to gaps. Sizes are ordered from one set of measurements, fitted against another, and when something does not line up, each side points to the other. Our window supply and installation service removes that gap by keeping the whole job with one team.
We measure the openings, help you choose frames and glass, order the windows to suit, then install, seal and finish them. The same people who quote the job are responsible for how it performs once it is in.
The service suits renovations, extensions, knock-down rebuilds, new homes and light commercial projects where you want a single point of contact.
In short: Hustle Installations measures, supplies and installs aluminium windows and doors for homeowners, builders and businesses. Cost depends on the number and size of windows, glass type, frame finish and site access. We aim to respond to enquiries within one business day, and measures and quotes are free.
Windows are only as good as the way they are fitted. A well-made frame installed out of square, packed poorly or left without proper flashing can leak, stick or rattle within a few seasons. When supply and installation are planned together, the order is built around how each opening will actually be fitted, including reveal depths, sill heights, cladding type and how water will be managed around the frame.
With our package you get one quote, one measure, one schedule and one team on site. We confirm sizes before ordering, coordinate delivery with the install date so windows are not left sitting exposed on site, and finish each opening with sealing and trims. You can learn more about ordering on our main window supply page, or see how we fit windows on our window installations page. If you only need product, we also offer supply-only orders for your own installer.
When different businesses handle the product and the fitting, a few problems come up again and again:
Measurement disputes. If the window does not fit, the supplier blames the measure and the installer blames the product. With one team measuring and fitting, responsibility is clear.
Timing clashes. Windows can arrive weeks before the installer is free, or the installer turns up before the order is ready. We set delivery and installation dates together.
Missing components. Flashings, trims, packers and sealants are easy to leave out of a supply order. We plan the full installation kit when we place the order.
Warranty confusion. When a leak appears, it can be hard to tell whether the product or the fitting is at fault. A single provider removes that argument.
Each package is scoped to your openings, building type and timeline.
A combined quote covers both product and labour, so the price reflects your windows and the work needed to fit them:
Ready for real numbers? Book a free measure and we will prepare a fixed supply and installation quote.
Because one team handles every stage, the steps flow into each other without handovers. You always know who to call, and the person who measured your openings is involved when the windows go in.
A typical job follows four steps:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
Supply only can work well for builders with their own experienced window installers, or for large developments where installation is already part of a trade package. Supply and installation usually suits homeowners, renovators and smaller builders who want one fixed price and do not want to manage the interface between products and fitting. It is also the safer choice for replacement work in older homes, where openings are often out of square and need careful packing and sealing.
Whichever option you choose, windows should meet AS 2047 for windows and external glazed doors, and safety glass must be used where AS 1288 requires it, such as in doors and low-level glazing. For bushfire-prone properties, frames and glass can be specified to suit the BAL rating where required. Planning a project in the city? Our window supply and installation in Melbourne page includes local price guides.
Homeowners often tell us their biggest worry is ending up with windows that look good on paper but leak, stick or let in draughts once they are fitted. Others have been caught between a supplier and an installer who will not take responsibility for a problem. Builders worry about delays, since a missing window can hold up plastering, painting and handover.
We address these risks by planning the product and the fitting together from the first measure. The quote spells out exactly what is included, from glass and finishes to removal of old frames and clean-up, so there are fewer surprises once work begins.
What sets us apart:
One team measures, supplies and installs, so you never chase two businesses.
The people who install your windows check the openings before anything is ordered.
Product, labour, removal and clean-up are listed clearly in one price.
Delivery and installation are booked together to avoid delays and site damage.
Every window is packed, flashed and sealed to suit the wall type.
We aim to respond to enquiries within one business day.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Our window supply and installation service covers measuring each opening, helping you choose frames and glass, ordering the windows, delivering them, removing old frames where needed, then fitting, flashing and sealing the new units. We finish trims where included and clean up afterwards. One team handles every stage, so responsibility for the result stays in one place.
The combined price includes labour, so it is higher than a supply-only quote, but it is often comparable to buying windows and hiring an installer separately. The difference is that you avoid gaps such as missing flashings, measurement errors and scheduling clashes, which can add unexpected cost when the two parts are handled by different businesses.
Yes. For every window supply and installation job, our team measures the openings on site before ordering. We check sizes, square, reveal depths and wall construction, so the new windows are made to fit the way they will actually be installed. This step is free and forms part of your quote.
We supply and install aluminium awning, sliding, casement, double-hung and fixed windows, along with sliding and stacking doors. Glass options include standard, double-glazed, low-E, laminated and obscure glass. We can recommend styles based on how each room is used, how much ventilation you want and how easy the windows need to be to clean.
Windows are made to order, so there is a manufacturing lead time after measure and sign-off, which varies with style, glass and finish. Once on site, most homes take one to several days to install, depending on the number of windows and access. We confirm the expected timeframe with your quote and book installation to match delivery.
Yes. Replacement work is a large part of what we do. Older openings are often out of square or have damaged surrounds, so we measure carefully, remove the old frames with care and pack and seal the new windows to suit. Any making good needed around the openings is discussed and included in the quote.
Yes. We remove old frames, packaging and offcuts, vacuum work areas and wipe down new frames and glass. Protective films are removed where appropriate. Our goal is to leave each room ready to use once the windows are in, so you are not left with a clean-up job after the trades leave.
Yes. Builders use our window supply and installation package to reduce coordination and keep window installation on schedule. We can work from plans for pricing, confirm sizes against the frame once it is up, and book installation to suit the build program before cladding and lining.
Yes. If you have your own installer, we can provide supply only. We still check sizes and specifications with you before ordering. Many clients start with a supply-only enquiry and switch to window supply and installation once they see the benefit of having one team responsible for the finished result.
Call us on 0499 090 079 or send your details through our contact form, including the number of windows, photos or plans if you have them, and your preferred timing. We aim to respond to enquiries within one business day and will arrange a free measure and quote.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
