A lot of Mount Waverley homes are comfortable in every way except one: their windows. Old single glazing lets the cold in during winter and the heat in during summer, and worn timber or early aluminium frames whistle when the wind picks up. We provide window replacement in Mount Waverley for family homes, renovated houses, townhouses and small shops around the Village, removing failed frames and installing new windows made for each opening. Our team also handles glazing, caulking and door work.
Many owners here are renovating and extending rather than rebuilding, so we often replace the original windows to match a new extension and bring the whole house up to the same standard.
We are based close by in Bayswater North, which makes it easy to fit measures and installations around family routines.
In short: Hustle Installations is a Melbourne window and door team that replaces old and draughty windows in Mount Waverley homes and businesses. Price depends on window size, frame type, glass and how many windows are replaced. We aim to respond within one business day and offer a free measure and quote.
Mount Waverley’s streets are full of post-war brick veneer homes and large family houses, with knock-down rebuilds and dual-occupancy townhouses mixed in. In the original homes, timber double-hung and casement windows from the 1950s and 60s are often swollen, loose and difficult to open, while later aluminium additions may have bent tracks and perished seals. Owners notice it most in winter, when draughts make living areas hard to heat, and in summer, when single glazing lets sun-baked rooms overheat. Extensions with modern windows can make the difference between old and new parts of the house very obvious.
We begin with an inspection of every window and explain which ones are worth replacing now and which can wait. We then recommend frames and glass that suit the house, often double-glazed aluminium or timber-look options, and provide a fixed written quote. Installation is completed room by room with careful sealing and tidy finishing. Read more about our window replacement service for Melbourne homes.
Mount Waverley’s housing and climate bring a few predictable window problems:
Winter draughts. Post-war timber windows shrink and twist over time, leaving gaps around the sashes that let cold air pour in. Replacement windows with modern seals stop draughts at the source and make heating far more effective.
Summer heat. Large single-glazed windows in north- and west-facing rooms let in a lot of heat on hot days. Low-E or double-glazed replacements keep those rooms noticeably cooler.
Mismatched extensions. When a modern extension is added to an older home, the original windows can look and perform very differently. Replacing them creates a consistent look and evens out comfort across the house, so no room is left feeling colder or warmer than the rest.
Tired frames on retained homes. On dual-occupancy sites where the original house is kept, owners often replace its windows so it sits comfortably alongside the new townhouse and appeals to future buyers or tenants.
From a single bedroom window to every window in the house, your Mount Waverley replacement can include:
As a general guide, replacing a standard window with aluminium in Mount Waverley costs around $700 to $1,800. Double-glazed replacements usually cost $1,200 to $3,000, and timber or heritage-style windows typically range from $1,500 to $4,000 or more. What affects your quote:
Need an exact number? We will measure your Mount Waverley home for free and send a written quote.
We know Mount Waverley families are busy, so we plan replacements to suit your household. Work is scheduled room by room, floors and furniture are protected, and each old window is removed only when its replacement is ready to go in. If you are renovating, we can coordinate with your builder so new and replacement windows are installed in a sensible order.
Each project follows these steps:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
Mount Waverley (VIC 3149) is in the City of Monash, about 16 km south-east of the Melbourne CBD. We replace windows in homes around Mount Waverley Village and Hamilton Place, near Mount Waverley and Syndal stations, and in the family streets close to Valley Reserve. Most of our work here is in post-war homes with original windows.
Our base in Bayswater North is usually only 25 to 30 minutes away depending on traffic, and we also work in Ashwood, Syndal, Mulgrave, Glen Waverley, Burwood and Oakleigh. Like-for-like window replacements in established homes are generally straightforward, but if you plan to enlarge an opening or change a front elevation, it is worth checking requirements with the City of Monash first.
In family homes, windows need to be safe as well as comfortable. Older Mount Waverley windows often open wide with no restrictors, and original glass in low windows may not be the safety glass expected today. Many timber windows have also become so stiff that they are rarely opened, leaving bedrooms and bathrooms poorly ventilated and prone to condensation and mould on cold mornings.
We replace these windows with frames that open easily and can include restrictors to limit openings in children’s rooms and upper floors. Where safety glass is required, we fit laminated or toughened glass in line with relevant Australian Standards. Double glazing reduces condensation, while smooth-opening sashes make it easy to air out rooms again. Every replacement is completed by experienced installers who explain each step clearly, keep you updated and leave your home tidy at the end of every day, with no loose glass or debris left behind.
What sets us apart:
If a window can be repaired, we tell you, and we only recommend replacement when it is the better long-term option for your home.
We choose glass and seals that tackle Mount Waverley's winter draughts and summer heat, and frames that suit its post-war homes and extensions.
Our team removes and refits windows in brick, weatherboard and rendered walls, keeping every opening square, secure and sealed.
Your written quote covers removal, supply, installation and making good, so there are no surprises once work begins.
We protect floors, furniture and gardens, work one opening at a time and take the old frames and glass away with us.
Replacement windows are installed to manufacturer specifications and relevant Australian Standards where required, including safety glass in the right locations.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Window replacement in Mount Waverley includes inspecting your existing windows, removing old timber or aluminium frames, preparing each opening and fitting new windows made to measure. We then seal and flash the frames, refit architraves and make good the reveals. We work on post-war homes, family residences, townhouses and small commercial premises.
As a general guide, replacing a standard window with aluminium costs about $700 to $1,800, double-glazed replacements about $1,200 to $3,000, and timber or heritage-style windows from around $1,500 to $4,000 or more. Glass choice, frame condition and the number of windows affect the final price, which we confirm after a free measure.
Yes, in most cases. Draughts in older homes usually come from gaps around shrunken or twisted sashes and poorly sealed frames. Replacement windows with modern seals, fitted and sealed properly into the opening, stop those draughts and make your heating far more effective through Mount Waverley's colder months.
Yes. We can supply replacement windows in frame colours, profiles and styles that match your extension, so the whole house looks consistent. If your extension is still being built, we can coordinate with your builder so all the windows are ordered and installed in a logical sequence.
We can. Restrictors limit how far a window opens, which is especially useful in children's bedrooms and on upper floors. We can fit them to new replacement windows and recommend suitable hardware based on the room and window type, while still allowing good ventilation and easy cleaning.
Yes. Where the original house is retained and a townhouse is built behind it, many owners replace the older windows so the home performs and looks better alongside the new build. We can work with your builder or schedule independently, depending on what suits the project.
Most standard windows are replaced within a few hours each, and a typical family home is finished in one to two days. Larger projects and custom frames take longer, and product lead times vary. We set out an expected timeline in your quote so you can plan around school and work.
Yes. We protect floors and furniture before we start, remove old frames, glass and packaging from site, and vacuum and wipe down each work area once the new windows are installed. Every window is tested before we leave, so your home is ready to use straight away.
As well as Mount Waverley, we replace windows in Glen Waverley, Ashwood, Syndal, Burwood, Oakleigh and Mulgrave, plus many other suburbs across Melbourne. Our Bayswater North base is only around 25 to 30 minutes away, so arranging a measure at a convenient time is usually easy.
Phone us on 0499 090 079 or use our contact form to tell us about the windows you would like replaced, including photos if possible. We aim to respond within one business day and will arrange a free measure and written quote for your Mount Waverley home.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
