Melbourne has a large stock of commercial buildings from the 1970s, 80s and 90s with single-glazed facades, faded tints and seals well past their best. Tenants notice the hot afternoons, cold corners and leaks, and prospective tenants notice the dated look. Meanwhile, new mixed-use developments need facades that meet current energy rules and still look striking from the street.
We install and upgrade facade glazing for offices, medical centres, mixed-use buildings and commercial strata properties. Work ranges from reglazing existing frames to new window walls, spandrel panels and ground-floor glazing.
In short: Hustle Installations delivers commercial facade glazing across metropolitan Melbourne from our Bayswater North base. Cost depends on facade area, glass performance, frame condition, height and access. We aim to respond to enquiries within one business day, with a free inspection and itemised proposal.
In Melbourne’s office and mixed-use market, an outdated facade can affect how a building leases. Tenants want natural light without glare, floors that stay comfortable through the seasons and an exterior that looks well maintained. Reglazing or replacing the facade is often one of the most visible upgrades an owner can make, and it can improve comfort and running costs at the same time.
We assess each building on its own terms. We look at orientation, existing framing, leak history, tenant use and any owners corporation or planning requirements, then propose glass and framing that suit the building and budget. Our commercial facade glazing page explains the options in more detail, and our structural glazing page covers the wider systems we install.
Commercial facades across Melbourne face a mix of pressures that shorten the life of older glazing.
Big daily temperature swings. Glass and frames expand and contract between cool mornings and hot afternoons, which works sealant joints and gaskets loose over time.
Hot western elevations. West-facing floors take the full force of afternoon sun in summer, driving up cooling loads and tenant complaints.
Wind-driven rain. Winter fronts push rain against exposed elevations, finding any gap in tired seals and blocked drainage.
Bayside air. Buildings near Port Phillip Bay are exposed to salt, which can corrode fixings and hardware, so materials need to suit the location.
We can upgrade a whole facade or target the elevations that need it most.
As a general guide, structurally glazed and curtain wall facade systems in Melbourne cost around $900–$1,800+ per m² installed, while frameless ground-floor glazing typically runs around $700–$1,400 per m². Reglazing within existing frames is priced per project after inspection. The main drivers are:
Need a firm figure? Book a free inspection and we will prepare an itemised proposal for your Melbourne building.
Facade work in Melbourne is staged around tenants, weather and building access.
Most of the Melbourne facades we work on stay occupied throughout. We agree on a staging plan with the owner or building manager, notify tenants of affected areas and close in each opening before we leave for the day. Lifting and noisy work can be scheduled early or after hours where the building allows, and we keep an eye on the forecast so glass is not lifted in high winds.
Each facade project follows four steps:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
Our base is on Bayfield Road East in Bayswater North (VIC 3153), in the City of Maroondah. From there we deliver commercial facade glazing across Melbourne, including office corridors along Burwood Road in Hawthorn, commercial precincts in Box Hill and Glen Waverley, mixed-use buildings around Oakleigh and Burwood, and inner-city sites in Richmond and South Yarra. Travel is around 25 minutes to Glen Waverley and Doncaster, about 45 minutes to the inner south-east and roughly an hour to bayside, depending on traffic.
For suburb-level information, see our commercial glazing pages for Hawthorn, Glen Waverley, Oakleigh and Burwood.
Owners and managers in Melbourne often call us when tenant complaints pile up: hot west-facing offices, water stains after every storm or fogged units that make the building look neglected. Some have tried patch repairs that fixed one leak only for another to appear a metre away.
We look for the cause rather than the symptom. We inspect the facade properly, explain what is failing and why, and propose a staged solution that fits the budget and the building’s use. Work is carried out by our own crew, with regular updates so you can keep tenants informed.
What sets us apart:
We understand glass, frames, seals and access as one connected system.
Glass and seals are chosen for Melbourne's heat, cold, wind-driven rain and bayside air.
Work is staged so tenants can keep using their floors.
Glass, framing, access and staging are priced clearly up front.
Our team inspects, installs and seals each elevation.
Each zone is cleaned and cleared before we move on.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Yes. We provide commercial facade glazing across metropolitan Melbourne from our Bayswater North base, including the inner city, the eastern and south-eastern suburbs and bayside. Our Melbourne commercial facade glazing work covers reglazing, window walls, spandrel panels, ground-floor glazing and leak repairs for offices and mixed-use buildings.
As a general guide, structurally glazed and curtain wall facade systems cost around $900–$1,800+ per m² installed, and frameless ground-floor glazing around $700–$1,400 per m². Reglazing within existing frames is priced after inspection. Height, access and staging around tenants all affect the final price.
It can help a lot. Melbourne's summer afternoons put heavy heat load on west-facing elevations. Solar control and low-E glass reduce heat gain and glare, and double-glazed units add insulation for winter. We recommend glass for each elevation rather than one product across the whole building.
Wind-driven rain pushes water into any weakness in a facade, such as perished gaskets, cracked sealant joints or blocked drainage holes. Daily temperature swings also work joints loose over time. We inspect the surrounding area to find where water is entering and fix the cause rather than just the visible stain.
In strata buildings, changes to the facade are usually common property matters that need owners corporation approval. Changes to the building's appearance may also need planning or building approval. We recommend confirming requirements early and can provide product data, samples and drawings to support decisions.
A single elevation on a low-rise building can take a few days once glass arrives, while a full multi-level facade can run over several weeks. Lead times depend on the glass specification. We provide a staged program with the proposal and keep you updated as each area is completed.
Usually not. We stage the work by level or zone, give notice of affected areas and close in openings before the end of each day. Some furniture may need to be moved back from the glass while we work. Noisy tasks can be scheduled outside business hours where the building allows.
Yes. We remove old glass, packaging and offcuts, clean the new glazing inside and out where accessible, and clear each work zone before moving on. Access equipment is removed as soon as each stage is complete so the site returns to normal quickly.
We cover metropolitan Melbourne, including Hawthorn, Richmond, South Yarra, Box Hill, Glen Waverley, Burwood, Oakleigh, Doncaster and bayside suburbs. Our Bayswater North base is around 25 minutes from Glen Waverley and Doncaster and about 45 minutes from the inner south-east, depending on traffic.
Call us on 0499 090 079 or send your details through the contact form on our website. Building address, photos, drawings and a description of the issues help us prepare. We will arrange a free inspection and provide an itemised proposal for your Melbourne facade.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
