Walk down almost any Melbourne street and you will see several generations of windows and doors: Victorian double-hung sashes, interwar casements, 1970s aluminium sliders and modern stacker doors opening onto decks. Each holds glass differently, and each develops its own faults with age.
Our window and door glazing in Melbourne covers reglazing timber sashes, replacing glass in aluminium windows and sliding doors, safety glass for entries and sidelights, obscure glass for bathrooms and double-glazed units where frames allow. We assess every opening and recommend glass that suits its position and use.
In short: Hustle Installations is a Bayswater North glazing company offering window and door glazing across metropolitan Melbourne. Cost depends on glass type, pane size, frame material and the number of openings. We aim to respond to enquiries within one business day and offer a free measure and quote.
In Melbourne homes, windows and doors take a beating from the weather. Timber sashes swell in wet winters and shrink in hot summers, loosening putty and letting glass rattle. West-facing sliding doors absorb fierce afternoon heat. Front entries with sidelights often still hold the original ordinary glass, which can be a safety concern. Replacing a broken pane is the obvious job, but it is also a good moment to consider what each opening really needs.
We look at the window or door as a whole: the frame, the hardware, the direction it faces and who uses it. Then we recommend glass to suit, from toughened safety glass in a back door to acoustic laminate in a street-facing bedroom. Our window and door glazing page explains our method in more detail, and our glazing services page covers the rest of the glass work we do.
These local conditions cause most of the window and door glazing problems we see around Melbourne.
Period timber sashes. Victorian and Edwardian homes in suburbs like Kew and Caulfield often have original sashes with brittle putty and thin glass. Careful reglazing keeps the character, which matters where heritage overlays apply.
Western sun on sliding doors. Large sliders facing west turn living areas into hothouses in summer. Low-E or double-glazed units in suitable frames reduce the heat load.
Bayside salt air. In suburbs near the bay such as Elwood, salt accelerates wear on rollers, hinges and glazing rubbers, which can stress the glass and let water in.
Apartment balcony doors. Doors on upper floors face stronger wind, and replacing their glass usually needs body corporate approval and planned access.
We can glaze nearly any window or door in your Melbourne property.
As a general guide, replacing glass in Melbourne windows and doors costs around $150–$450 per m², while laminated, low-E or acoustic glass is typically $300–$700 per m². Retrofitting double glazing into a suitable window frame is usually around $400–$1,200 per window. What shifts the price:
Want it costed properly? We will measure each opening free and itemise the quote.
Every Melbourne window or door we glaze is checked for how it opens, closes and seals before the glass goes in.
Melbourne jobs often mean working in occupied homes, sometimes through a narrow hallway to reach the back door, sometimes up apartment stairs. We protect floors, keep children and pets clear of the work area and secure any opening that has to wait for made-to-order glass. Before fitting, we check that sashes slide and doors close properly so the new glass is not put under stress.
Each window and door job follows four steps:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
We operate from Bayfield Road East in Bayswater North (VIC 3153), in the City of Maroondah, and glaze windows and doors right across metropolitan Melbourne. That includes period homes in Kew and Caulfield, post-war houses in Mount Waverley, Art Deco flats in Elwood and modern townhouses throughout the south-east. Travel is around 25 minutes to Doncaster and Glen Waverley, about 45 minutes to the inner south-east and roughly an hour to bayside, depending on traffic.
For local information, see our glass installation pages for Kew, Mount Waverley, Caulfield and Elwood. Further afield? Send us your details and we will confirm availability.
Melbourne homeowners often call us after a rushed repair. A period sash was reglazed with modern float glass and silicone instead of putty, spoiling its look. A sliding door pane was swapped without fixing corroded rollers, so the door still jammed. A front door sidelight was replaced with whatever glass was handy rather than suitable safety glass. Others simply could not get anyone to quote for a single small window.
We take every opening seriously, whether it is one bathroom window or every door in the house. We respect the character of older homes, fit safety glass where it is needed, check hardware so the glass lasts and match tints and patterns to neighbouring panes. Clear quotes and reliable bookings complete the picture.
What sets us apart:
Experience with every common window and door type.
Glass and seals chosen for period homes, western sun, bayside air and windy upper floors.
Doors, sidelights and low windows glazed with suitable safety glass.
Rollers, hinges and sashes inspected so the new glass is not stressed.
Tint, pattern and thickness matched to surrounding panes where possible.
Broken glass contained, waste removed and panes cleaned before we leave.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
Yes. We offer window and door glazing across metropolitan Melbourne from our Bayswater North base. Our crew reglazes timber sashes, replaces glass in aluminium windows and sliding doors, fits safety glass to entries and sidelights and installs double-glazed units where frames allow, for houses, units and apartments.
As a general guide, replacement glass costs around $150–$450 per m², laminated, low-E or acoustic glass around $300–$700 per m², and a double glazing retrofit about $400–$1,200 per window. Frame preparation, door panel size and access affect the final price, which we confirm after a free measure.
Yes. Many Melbourne suburbs such as Kew, Hawthorn and Caulfield have period homes under heritage overlays. Reglazing original sashes with putty and suitable glass keeps their appearance while fixing rattles and draughts. Where external changes are proposed, check with your council first. Simple glass replacement in existing frames is usually straightforward.
Low-E glass reduces heat gain from strong afternoon sun, and a double-glazed unit adds insulation if the frame can hold it. Laminated or toughened safety glass is generally required in doors. We assess the frame and orientation and recommend the most practical combination for comfort and safety.
It can. In bayside suburbs such as Elwood, Brighton and St Kilda, salt accelerates wear on rollers, hinges and glazing rubbers. Worn hardware can stress glass and let water in. When we glaze coastal windows and doors, we check these parts and recommend replacements where needed.
Generally, yes. Glass beside doors is a human impact area under AS 1288, so Grade A safety glass such as toughened or laminated glass is usually required. Many older Melbourne homes still have ordinary glass in sidelights, and replacement is a good time to upgrade.
Standard glass can often be supplied within a few days, while toughened, laminated and double-glazed units are made to order and take longer. Most windows and doors are glazed in one visit once the glass arrives. We secure any opening that has to wait.
We cover metropolitan Melbourne, including Kew, Hawthorn, Camberwell, Caulfield, Mount Waverley, Glen Waverley, Elwood and Brighton. Travel is around 25 minutes to Doncaster and Glen Waverley, about 45 minutes to the inner south-east and roughly an hour to bayside, depending on traffic.
Yes. We lay protection, contain and remove broken glass, take away old putty, packaging and offcuts, and clean the new glass and surrounding frames. Each window and door is tested before we leave, so it is ready to use straight away.
Call 0499 090 079 or send photos of each window or door through our contact form. We will arrange a free measure and provide a written quote listing the glass for every opening. We aim to respond to enquiries within one business day.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
