No two commercial entries carry the same load. A pharmacy door might cycle hundreds of times before lunch, a clinic needs doors that wait patiently for walking frames, and an office lobby has to lock itself the moment the last tenant leaves. The door system should be chosen around those patterns, not picked from a catalogue.
We supply and fit commercial automatic doors, including sliding systems, swing door operators and the sensors, locks and controls that go with them. We also adjust and service existing doors so they keep running reliably.
In short: Hustle Installations supplies, installs and services commercial automatic doors for businesses and strata buildings. Pricing depends on the door system, opening width, glass, locking and access control. We aim to respond to every enquiry within one business day and offer a free site assessment and written quote.
The difference between a commercial automatic door that quietly does its job and one that annoys everyone usually comes down to features chosen at the start. Operating modes let you switch between fully automatic, exit-only, hold-open and night lock with a key switch or programme selector. Battery backup keeps a door working, or lets it open and lock in a controlled way, when the power drops. Access control can tie the door to card readers, keypads or an intercom so it only admits the right people outside trading hours.
We look at your entry, your hours and your users, then put together a system with the operator, sensors, locking and controls that suit them. You get a clear written specification so you know exactly what is being supplied. Our main automatic doors page explains the wider range of systems we work with.
Many businesses put up with door faults for months before calling anyone, but these symptoms usually point to a fixable cause.
Ghost opening. A door that opens for passing traffic or blowing leaves wastes heating and cooling and wears the operator. Sensor fields can often be narrowed or re-angled.
Hesitation or jerky travel. Worn rollers, debris in floor guides or a struggling drive belt make doors stall, shudder or close unevenly.
Unreliable locking. If staff have to wrestle the door at closing time, the lock, keeper or programme selector may need attention.
Closing too quickly. Short hold-open times and narrow safety fields catch out older customers, children and anyone pushing a pram or trolley.
We handle the full lifecycle of a commercial automatic door, from choosing the system to keeping it running.
Every commercial entry is priced on its own merits, because the system and the site both change the work involved.
For indicative price ranges, see our commercial automatic doors Melbourne page. Need a firm number? We will assess your entry and quote in writing at no cost.
A commercial door has to work on opening day, so we plan the changeover as carefully as the hardware.
Before anything is ordered we confirm the opening, the traffic pattern, the locking needs and who manages the building, so the system arrives right the first time. On the day, we keep the work area tidy and the entry as usable as possible, then spend time tuning sensor fields, speeds and hold-open times with your staff before handing over.
Here is how a project runs:
Request a free, no-obligation quote — we design with you in mind.
Fully licensed and insured window and door specialists you can trust.
The highest quality products and materials at very reasonable prices.
We deliver the results you want on budget and on time, every single time.
Retail and supermarket entries usually suit bi-parting sliding doors with wide openings and presence sensors that cope with trolleys and constant flow. Medical centres, pharmacies and aged care sites often benefit from longer hold-open times and low-energy swing operators on internal doors, and where a door forms part of an accessible path of travel, AS 1428.1 may apply where required. Offices and strata lobbies typically need tight integration with access control, intercoms and timed locking schedules.
Hospitality venues have their own needs, such as exit-only modes at closing and doors that hold heat during busy service. Where new glass panels are involved, glass selection should follow AS 1288. We take these differences into account so your system suits the venue rather than a generic template.
When a commercial automatic door is unreliable, staff start propping it open or switching it to manual. That lets heating and cooling escape, leaves the premises less secure and sends a poor message to customers at the front door. Often the root cause is an operator that was never rated for the traffic or a door that has not been looked at since it was installed.
Business owners and property managers also tell us it is hard to get straight answers about which system to choose and what servicing it really needs. We explain the options in plain language, quote in writing and stay available to adjust or service the door after handover.
What sets us apart:
We match operators and hardware to how often your door actually cycles.
Locking, modes and access control are set up around your trading hours and security needs.
Your written quote lists the operator, sensors, locks and controls being supplied.
Sensor fields, speeds and forces are tuned and tested before we hand over.
We plan changeovers to keep your entry usable and your business trading.
We can adjust, repair and service your doors long after installation.
Tell us what you need, where the project is located, and what outcome you want. We ask the right questions, review the scope, and provide a clear quote with no obligation.
We inspect access, openings, levels, existing frames, surrounding finishes, and any site-specific requirements. Accurate measurement helps prevent delays, gaps, and unnecessary rework.
We confirm the installation approach, materials, scheduling, and finish expectations. For Melbourne projects, we can also discuss thermal performance, double glazing, weather sealing, and BAL rating considerations where required or relevant.
Our team installs with care, precision, and safety. We focus on alignment, fixing, glazing, sealing, operation, and clean presentation.
Before we leave, we check the installation, clean the work area, and walk through the finished result. You get a tidy site and a result built to perform.
We supply commercial automatic doors in two main families: sliding systems, including single and bi-parting doors, and swing door operators for hinged doors. Each system includes the operator, activation and safety sensors and controls, and can be paired with electric locking, battery backup and access control. We recommend a system after looking at your opening, traffic and security needs.
Sliding doors suit busy shopfronts and lobbies because they open without swinging into anyone's path and can be made wide. Swing operators suit existing hinged doors, narrower openings and internal doors. The choice also depends on wall space beside the opening, floor space in front of it and how many people use the door each day.
Most commercial automatic doors can be set to modes such as fully automatic, exit only, hold open, partial opening and night lock. A programme selector or key switch lets staff change modes quickly, for example switching to exit only at closing time. We set the available modes to suit your trading hours and train staff to use them.
In many cases, yes. Commercial automatic doors can be linked to card readers, keypads, intercoms and timed schedules so the door locks after hours and only opens for authorised people. Compatibility depends on the existing system and wiring, so we check what you have during the site assessment and coordinate with your security provider where needed.
That depends on how the door is configured. With a battery backup, many doors can keep operating for a period or perform a controlled final opening or closing. Without one, sliding doors can usually be moved by hand once unlocked. We discuss the right power-loss behaviour for your premises and its security needs before installation.
Ghost opening is usually caused by a sensor field that is too wide or angled towards passing foot traffic, reflections, or moving objects such as signs and leaves. Adjusting or replacing the activation sensor often solves it. Fixing this helps your premises hold its temperature and reduces wear on the operator.
Service frequency depends on how heavily the door is used. Busy retail and medical entries generally benefit from more frequent checks than a quiet office door. A service typically covers sensors, safety functions, rollers, guides, belts, locks and settings. Regular servicing helps catch wear early and keeps commercial automatic doors operating safely.
Often we can. We assess the existing operator, sensors and hardware, identify the fault and advise whether a repair, adjustment or upgrade makes the most sense. Some older or proprietary systems may have limited parts availability, and if that is the case we will explain your options honestly rather than keep patching a failing door.
We plan installation to keep disruption low. Where practical, the main changeover is scheduled outside trading hours or staged so customers can still enter. We keep the work area tidy and safe, remove packaging and offcuts when we finish, and make sure the door is tested and ready before the business reopens.
Call us on 0499 090 079 or send your details through our contact form. Tell us the type of business, the entry you want automated and any photos you have. We aim to respond within one business day, arrange a free site assessment and provide a written quote for your commercial automatic doors.
Ready to upgrade, replace, or install? Contact Hustle Installations for a clear quote, practical advice, and workmanship you can rely on.
Tell us about your project, the service you need, and where the property is located. We will get back to you with the next step as soon as possible.
Prefer to talk? Call us on 0499 090 079.
For windows, doors, glass, glazing, caulking, skylights, pergolas, sun shades, and automatic doors, talk to Hustle Installations today. With us, you can be assured of precise work with clean finishes and reliable communication. We provide clear quotes, practical advice, and workmanship built to last for Melbourne homes, businesses, and construction projects.
